ELGI OHTC Smart Clean
Travelling Speed up to 22 mts/min and can handle upto 2016 Spindles Ring-frame, 280 Spindles Speed-frame
VFD Drives for Traverse and Suction
Automatic control of suction and blowing through AI Controls (Patent Pending)
Linking to the Spindle Monitoring System
30% Higher Blowing and Suction
Auto parking/ Obstacle Auto reversing/ Infrared Ray Obstacle Sensor
Centralized Waste Collection System
Available in Bus bar and Chain Drive
In-house manufactured Energy Efficient Motor
ELGI OHTC Nugen
Specially designed for Long Ring frame, Winders, TFO, Looms
Travelling speed up to 19 m/min
New Design involutes for Uniform Airflow
In-house manufactured Energy Efficient Motor
Auto parking/Obstacle Auto-reversing/Infrared Ray Obstacle Sensor
Centralized Waste Collection System
Push button on both sides for Start/Stop & Reversal of the Unit
Latest version of PLC Control
Your browser does not support the video tag.
Nugen - AP (Ring Frame Auto Piecer)
OHTC for Auto-piecer in Ring frame. A patented design to ensure the blowing pipes swivel automatically when the piecer comes across
NUGEN -W (For Weaving Looms)
NUGEN -W is a totally integrated system with in-built filter. This range of overhead cleaners is best suited for the hard fabric weaving industries like denium & hosiery. It has been designed to operate in both straight line and zig- zag pathways. The filter helps segregating waste and fulff and also helps to eliminate moist starch content possibly present in the yarn. Periodic cleaning of the filter will not only enhance cleaning but will also increase productivity
ELGI OHTC Superclean
Specially designed for Link-coner, Short Ring-frames & Speed-frames
Belt Drive with Travelling Speed up to 12 m/min
In-house manufactured Energy Efficient Motor
Auto parking/Obstacle Auto-reversing/Infrared Ray Obstacle Sensor
Centralized Waste Collection System
Push button on both sides for Start/Stop & Reversal of the Unit
Bobbin Transporting System
Customized design - Linking Speed-frame to Ring-frame
Various options -
Manual Bobbin Handling System
Closed Loop System
PLC Based Automated System with Reserve Station
Fully Automated with Creel change system
Exchanger for Auto-doffer Speed-frame (Single / Twin)
Stripper available from Single to Ten Spindle
Exchanger - 3 to 4 exchanges per minute. Stripper - 0.8 stripping per minute per spindle
Effective stripping or roving through blowing and Suction
Inverter controlled train movement up to 16 m/min
Specially designed aluminum alloy rugged rails and trains for long life
Completely maintenance-free with minimum interference running for more than a decade
Perfect profiles of rails and smooth finish ensure smooth running of trains, provides longer life and corrosion-free
Specially designed acetate wheel for friction-free movement and longer life
Color sensors to avoid bobbin mixing (Optional)
Argus Infrared Spark Detector
Detects a single spark in 6 microseconds
Detects sparks at speeds up to 60 meters per second
Special design and circuitry eliminate reactions to static electricity
Operates in temperatures from -40°C to +85°C
Low voltage 24-volt operation
Control Panel
Advanced Digital Technology with LCD display
GSM technology with instant SMS alerts in mobile phones for Hire and Fault detection
Tower lamp with loud siren to alert spark detection
Self-diagnosis and fault indications in LED and LCD
Simple push-button reset and easy installation
Argus Spark Divertor
Automatic fire protection system for chute feed and lap feed lines
Even a single spark will activate diverter, stop the machine, and sound alarm
Built-in air tank for quick response
Compact design - requires only 1.5 meters or 5 feet of space due to high speed - 50 millisecond reaction time
Works in areas of positive or negative air pressure
WS - 15 Bale Plucker Safety
Argus 535 infrared sensor can detect sparks as small as 1 mm and activate the system
Automatic Water Extinguisher with four spray nozzles on both sides quenches the fire and prevents spreading on the bales
Control panel gets Alarm system activated and shuts down the Blow-room line
Argus system is also available with Zero residue Gas extinguishing System
Yarn Conditioning System PROFIX
Well-proven design with separate vessel for conditioning and steam generation
Energy Saver Unit - Separate chamber for readymade steam reduces cycle time, increases number of batches, reduces power consumption up to 20%
Vacuumization up to 95% ensures uniform and maximum moisture gain
Capable of low-temperature yarn conditioning from 46°C to heat setting up to 120°C in the same vessel
Inbuilt safety features such as PLC control valve for releasing excess pressure and thermostat protection for heating coil and motors
Equipped with PLC and up to 8 sets of various programs can be stored
Single/Multiple Cycle (up to 20 sets) programming is possible
Batch Capacity - 400/600/900/1200/1500/800/2100 kgs per batch
Production Capacity - 10/16/24/30/36/42/48 tons per day
Suitable for conditioning yarn in Cone Trolley, Cops Trolley, Pallet, and Hank forms
Platform arrangement for automatic loading and unloading
Ideal for conditioning of Cotton / Viscose / Blends / Polyester / Silk / Acrylic and Wool
Yarn Conditioning System KUBIX
Cubical main vessel to handle Pallets as well as Trolleys
Kubix F - on Floor without Pit - 360 / 720 / 2160 Kgs per batch
Kubix P - In pit with Pallets of 8 layers - 750 / 1100 / 1500 / 1900 / 2200 Kgs per batch
Kubix A - In pit with Pallets of 13 layers - 3050 Kgs per batch
Can be linked to Cone Transportation System
Preconditioning is possible as an option
Well proven design with separate vessel for conditioning and steam generation
Energy Saver Unit — Separate chamber for readymade steam reduces cycle time. increases no. of batches. reduces power consumption up to 20%
Vaccumization up to 85% ensures uniform & maximum moisture gain
Capable of low temperature yarn conditioning from 46°C to heat setting up to 95°C in the same vessel
Built-in with safety features such as PLC control valve to release excess pressure and Thermostat protection for heating coil & motors
Equipped with PLC and up to 8 Sets of various programs can be stored
Single / Multiple Cycle (Up to 20 Sets) programming is possible
Suitable for conditioning Yarn in Pallet, Cone Trolley, Cops Trolley & Hank form
Platform arrangement for Automatic Loading & Unloading
Download Brochure
